car subwoofers under 300

When you’re looking for a new car subwoofers under 300, it can be tough finding the perfect one. There are so many options available on today’s market! But thanks to our team of experts who regularly update and test out different models in order provide only what matters most-top quality images no matter how big or small they may seem

The top 10 car subwoofers under 300 on this list will help you to find the perfect device. Don’t spend too much time reading about them though because we already have their reviews right here!

Want to find a great car subwoofers under 300 but don’t want spend too much time searching high and low? This top list should be your best bet. It comes with all the basic features that are required in good selling products, such as one of their most popular items which has an average rating 4 stars after more than 1200+ customer reviews!

There are so many different types of car subwoofers under 300 to choose from, it can be difficult knowing which one is right for you. However, we’ve put together our top 10 recommendations! If there’s something specific in mind or just want help deciding between styles then read on below:

Top 10 List of Best car subwoofers under 300 is given below

Finding the right car subwoofers under 300 for your needs is important. To help you find one, we analyzed online retailers and looked at factors like ease of use as well as durability to come up with this list! The top 10 products on Amazon

We’ve consulted top experts who have in-and-out knowledge about the car subwoofers under 300. We chose a quality product, which comes with amazing features you haven’t heard of before and filtered over 100+ products to give this list its authenticity!

1
Skar Audio SVR-12 D4 12" 1600 Watt Max Power Dual 4 Ohm Car Subwoofer
  • Peak Power: 1, 600 Watts RMS Power: 800 watts
  • 2.6" (65.5mm) dual 4-ohm high temperature 4-layer copper Voice Coil
  • Powerful high flux ferrite motor with advanced air Flow Cooling Design Fs: 34 Hz
  • Engineered for incredibly deep, dynamic, and powerful bass Sensitivity: 86.5 dB
  • High Roll Foam Surround stitched to competition Grade pressed paper cone
Sale2
Kicker 10" 600 Watt 4 Ohm Vented Thin Profile Subwoofer Enclosure | 44TCWC104
  • 3/4" medium-density fiberboard construction covered with carpet
  • 4-ohm total impedance
  • power handling: 300 watts RMS
3
Skar Audio Single 10" Complete 1, 200 Watt Sdr Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
  • All-in-one complete SDR series loaded Subwoofer complete bass package
  • Peak Power: 1, 200 watts | RMS Power: 600 watts
  • Includes x1 Skar Audio sdr-1x10d2 single 10" Loaded 1, 200 watt vented subwoofer enclosure
  • Includes x1 Skar Audio rp-800.1D class D 800 watt mono-block amplifier
  • Includes x1 Skar Audio skar4anl-cca 4 gauge complete amplifier wiring kit
Sale4
BOSS Audio Systems PM1500 Monoblock Car Amplifier - 1500 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Subwoofers
  • Power - 1500 Watts Max x 1 @2-Ohms, 700 Watts Max x 1 @4-Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
5
Rockville DK58 PACKAGE Dual 8" 1600w Loaded K5 Car Subwoofer Enclosure+DB11 Amp
  • Loaded Sub Enclosure Features: Final Impedance: 2 Ohm. Peak Power Handling: 1600 Watts. CEA-2031 Compliant RMS Power Handling: 400 Watts. ¾” MDF enclosure. Bonded stapled and braced. Computer designed vents.
  • Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 0.80 Cu Ft per sub. Vent dimensions: 2.5" x 6.75" x 9.75".
  • Tuning frequency of enclosure: 37 Hz. 1.5" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire.
  • Amplifier Features: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote.
  • CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.).
6
Subwoofer Frequency Generator / Tester for Equalizers, Crossovers, Amplifiers, Subs, Car Stereos, Home Theaters and more
  • Generator low frequency test tones
  • Great for showing off subwoofers
  • 98hz down to and earth shaking 10hz
  • English (Publication Language)
7
Rockville SS8P 400 Watt Slim Under-Seat Powered Car/Truck Subwoofer Sub+Amp Kit
  • Package Includes: (1) Rockville SS8P 400 Watt Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
  • Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%. Subwoofer Level Remote Control. Fuse Rating: Single 15A
  • Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
  • Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets . Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
Sale8
BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Sale9
JBL Dual 12" Car Audio Ported Enclosure
  • The JBL Stage slim enclosure are designed to fit in just about any vehicle with simple installation. It is slim, sleek, stylish, and don’t sacrifice on sound.
  • HARMAN standard reliability testing: Speakers are carefully tuned to assure high SPL and low distortion. This means that the usual specifications as well as speaker characteristics are considered when tuning for the JBL sound.
  • JBL speakers have to undergo a rigid testing process that would destroy lesser speakers. JBL freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
  • 500 watts of sheer impact: The Stage 1200D ported enclosure comes loaded with two of JBL's Stage 122AM 12" subwoofers, which handle up to 500 watts RMS together. The enclosure's 2-ohm impedance gets the most possible power out of your mono amp. The slot-ported enclosure is made from rugged 5/8" MDF covered with black carpet to withstand the bumps and bruises of life in a car. JBL tunes the enclosure for maximum performance, so you can count on impressive low-end punch.
  • JBL 1 Year Manufacturer Warranty
10
Bbox 12SVSC Single Vented 12 Inch Subwoofer Box - Premium Subwoofer Box Improves Audio Quality, Sound & Bass - Car Subwoofer Boxes & Enclosures with Nickel Finish Terminals
  • SINGLE 12 INCH VENTED SUBWOOFER ENCLOSURE: The Bbox 12 inch single vented subwoofer box enclosure is designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. Get the most out of your vehicle's subwoofer with a truck sub enclosure designed for power and quality.
  • SPECIAL FORMULA: We use Aliphatic wood glue on our 12" subwoofer enclosures to ensure an airtight seal between all MDF parts. Each 12 inch subwoofer box also gets a second application of glue around all internal joints after the final assembly.
  • HIGH GRADE MDF: Our subwoofer box enclosures are built with a durable MDF that is 5/8" thick for solid frequency response and accurate music reproduction and we use a CNC Miter to ensure an airtight fit for your powered subwoofer. Our Dado design and construction offers a precision fit for our car subwoofer boxes & enclosures, which ensures a rattle and noise free environment.
  • AIRTIGHT RECESSED SIDE PANELS: We use quality materials like our special aliphatic resin wood glue and brad nails from a pneumatic nail gun to create a tight hold on the MDF parts during the glue drying process to ensure that our subwoofer boxes have an airtight no-leak, no-rattle air chamber improving the overall sound quality of your sound system.
  • ENCLOSURE DIMENSIONS: Since your subwoofer box or enclosure most likely goes into the boot of your car, checking their dimensions is highly important. Enclosure Dimensions Mounting Depth:13.875”, Sub cut out: 11.125”, Height: 13.625”, Width: 16”, Depth: 17.375”

If you’re looking for some car subwoofers under 300 that won’t let you down, we have the best solution for you. We update our list of products regularly so that it features only what matters most and is tailored towards meeting your needs as an individual.

The products are selected by expert reviewers. The expert reviewers have tested them in conditions catered towards your specific requirements as well. The reviews are open to the public, so you can trust that they know what they’re talking about when it comes to picking a new software solution!

To find a supplier that can provide you with high-quality car subwoofers under 300 for your product, we have the perfect solution. Our list of products is regularly updated so as to feature only what matters most and be tailored towards meeting individual requirements – just let us know how much information or feedback on these points would be helpful!